Aoxuan WC67Y — Press Brakes
Aoxuan — supplied & supported by A1
The WC67Y is Aoxuan's NC press brake: a torsion-bar hydraulic machine with an Estun E21 control on the X and Y axes, for shops that bend straightforward parts and want a simple machine to set up. The full range runs from 40 t at 1.6 m to 600 t at 6 m; the four models here mark out the sizes most fabrication shops ask for. Bosch Rexroth valves, a Siemens main motor and Schneider electrics are standard.
A1 supplies and supports the WC67Y range: we quote the machine, arrange delivery, install and commission it, and stay on as the service contact afterwards. If you are weighing an NC machine against a CNC one, tell us what you bend and we will say plainly which pays off for your work.
Models in this range
4 models. Pick the size that suits your work — we will confirm the right configuration with you before quoting.
| Model | Tonnage | Bending length | Quote |
|---|---|---|---|
| 63T/2500 | 63 t | 2,500 mm | Request a quote |
| 100T/3200 | 100 t | 3,200 mm | Request a quote |
| 160T/4000 | 160 t | 4,000 mm | Request a quote |
| 300T/4000 | 300 t | 4,000 mm | Request a quote |
More press brakes
Press Brakes
Promecam Celeris — Press Brakes
Quote only
Promecam
- Tonnage
- 110–300 t
- Bending length
- 3,000–4,000 mm
4 models in this range
Press Brakes
UsedDYE 100t x 3.6m 7-Axis CNC Press Brake
$33,999 +GST
DYE
- Tonnage
- 100 t
- Bending length
- 3,600 mm
Press Brakes
UsedDYE Syncro 100t x 4.2m CNC Press Brake
$24,999 +GST
DYE
- Tonnage
- 100 t
- Bending length
- 4,200 mm
Already running one? A1 services what it sells — press brake service & repair.
Looking for a machine, or need one serviced?
Used and new machines with prices and specifications. Service, repair and breakdown support across SE Queensland, fly-in interstate and remote.