Tube Laser Cutters
Tube & profile lasers, single-chuck to four-chuck auto-loading — supplied & supported by A1.
A tube laser replaces the saw, the drill, the coping and the marking-out in one handling: it rotates and feeds lengths of RHS, SHS, CHS, angle and open profile, cutting holes, mitres, copes and slot-and-tab joint features straight off the drawing. Frames that used to be cut, drilled and fitted-up over days go together like a kit.
Tube Laser Cutters
HongNiu 3D 7-Axis H-beam Tube Laser Cutting Machine
Quote only
HongNiu
- Laser power
- 12,000 W
Tube Laser Cutters
HongNiu 850 three chucks fiber laser pipe cutting machine
Quote only
HongNiu
- Laser power
- 6,000 W
Tube Laser Cutters
HongNiu Extra Large Chuck Metal Pipe Laser Cutter
Quote only
HongNiu
Tube Laser Cutters
HongNiu Four-Chucks Laser Tube Cutting Machine (Semi-Auto Loading)
Quote only
HongNiu
- Laser power
- 6,000 W
Tube Laser Cutters
HongNiu Semi-Automatic Loading Two-Chucks Fiber Laser Tube Cutting Machine
Quote only
HongNiu
- Laser power
- 1,500 W
Tube Laser Cutters
HongNiu Side-Mounted Three-Chucks Laser Tube Cutting Machine (Semi-Auto Loading)
Quote only
HongNiu
- Laser power
- 1,500 W
Tube Laser Cutters
HongNiu Two-Chucks Fiber Laser Tube Cutting Machine
Quote only
HongNiu
- Laser power
- 1,500 W
Tube Laser Cutters
Promecam Laser cutting machines with 1 chuck and 1 tube rest — Tube Laser Cutters
Quote only
Promecam
- Laser power
- 3,000 W
2 models in this range
Tube Laser Cutters
Promecam Laser cutting machines with 2 chucks and 1 tube rest — Tube Laser Cutters
Quote only
Promecam
- Laser power
- 3,000–12,000 W
4 models in this range
A1 supplies tube lasers from straightforward single-chuck machines for shorter runs up to two-, three- and four-chuck machines with semi-automatic loading for production work. Machines are supplied Australia-wide; installation, commissioning and hands-on service cover SE Queensland and scheduled fly-in interstate, with remote diagnostics anywhere.
Common questions
What can a tube laser cut?
Round (CHS), square (SHS), rectangular (RHS), oval, angle, channel and open profiles in mild steel, stainless and aluminium — typically from around 12 mm diameter up to the 200–250 mm class depending on machine. It cuts holes, copes, mitres and tab-and-slot features in one setup.
Do I need a tube laser if I already have a flat-bed laser?
They're different machines: a flatbed cuts sheet, a tube laser feeds and rotates lengths of section. If your work is frames, rails, balustrade or structural sections, the tube laser is the one removing the saw-drill-cope bottleneck.
What's the real payoff over sawing and drilling?
Fit-up time. Joint-ready parts — copes, mitres, tabs and slots cut in place — mean weld fixtures get simpler and frames self-locate. Shops usually find the win in the welding bay, not at the saw.
Already running one? A1 services what it sells — machinery service, repair & diagnostics.
Looking for a machine, or need one serviced?
Used and new machines with prices and specifications. Service, repair and breakdown support across SE Queensland, fly-in interstate and remote.