Sanding & Deburring
Deburring, edge rounding & finishing machines, 400–1500 mm widths — supplied & supported by A1.
Every laser-cut part comes off the bed with burrs, dross and an oxide edge — and most shops still fix that with a person and a flap disc. A deburring machine passes parts through abrasive belts and brushes and returns them edge-rounded, oxide-free and uniform, in minutes. It takes over the hand-finishing that otherwise soaks up operator hours every day.
Sanding & Deburring
Huanhao R-R400mm
Quote only
Huanhao
- Max work width
- 400 mm
Sanding & Deburring
Huanhao R-R630mm
Quote only
Huanhao
- Max work width
- 630 mm
Sanding & Deburring
Huanhao R-R1000mm
Quote only
Huanhao
- Max work width
- 1,000 mm
Sanding & Deburring
Huanhao R-R1300mm
Quote only
Huanhao
- Max work width
- 1,300 mm
Sanding & Deburring
Huanhao R-R1500mm
Quote only
Huanhao
- Max work width
- 1,500 mm
Sanding & Deburring
Huanhao RWP-800mm
Quote only
Huanhao
- Max work width
- 800 mm
Sanding & Deburring
Huanhao RWP-1000mm
Quote only
Huanhao
- Max work width
- 1,000 mm
Sanding & Deburring
Huanhao RWP-1300mm
Quote only
Huanhao
- Max work width
- 1,300 mm
Sanding & Deburring
Huanhao RWP-1500mm
Quote only
Huanhao
- Max work width
- 1,500 mm
A1 supplies Huanhao sanding and deburring machines in working widths from 400 mm to 1500 mm — the R-R sanding series and RWP deburring series — supplied Australia-wide, installed and supported from SE Queensland, with guidance on abrasives and extraction for the materials you run.
Common questions
Do laser-cut parts need deburring before powder coating?
Yes — sharp edges thin the coating (the first place it fails), and the laser's oxide layer undermines adhesion. Edge rounding plus oxide removal gives uniform film build and real corrosion resistance. If parts go to paint or powder, deburring isn't cosmetic.
What does a deburring machine do that a linisher doesn't?
A linisher does one face or edge at a time and the finish depends on the operator. A deburring machine processes the whole part — both faces, all edges — consistently, at pace. The business case is usually the labour it frees, not the finish alone.
Can one machine handle steel, stainless and aluminium?
Yes, with one hard rule: aluminium and steel dust must never mix in the same extraction — it's a fire risk. Proper extraction and dedicated abrasives per material are part of a safe setup, and part of what A1 commissions with the machine.
Already running one? A1 services what it sells — machinery service, repair & diagnostics.
Looking for a machine, or need one serviced?
Used and new machines with prices and specifications. Service, repair and breakdown support across SE Queensland, fly-in interstate and remote.